MAX-E2/841 “Lite”

Totally Enclosed Fan Cooled, [HH]

HP	1 HP through 300 HP
Speed	3600, 1800, 1200 RPM
Voltage	460V
Frequency	60 Hz.

Features

Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum
CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3 Minimum (444T and above)
IEEE 841 Ready
Meets IEEE 45 Marine Duty
Class F Insulation
Class B Temperature Rise
NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C
Cast Iron Frame, End Brackets & Fan Cover and Main Conduit Box
Grounding Terminal Inside Main Conduit Box with additional Foot Grounding Provision
Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
Designed for 40˚C Ambient Temperature
Designed for 3300 ft. Elevation
Bi-Directional Rotation
1045 Carbon Steel Shaft
Aluminum Die Cast Squirrel Cage Rotor Construction
Paint System: 2 Part Epoxy
Paint Color: Blue - Munsell 5PB 3/8
High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM
Automatic Grease Discharge Fittings
Rubber Dust Flinger on DE for F# 140T - 280T
Oil Seal/V-Ring on Both Ends for F# 320T - 400T
Labyrinth Type Metal Flinger on Both Ends for F# 440T and Larger
Cast Iron Inner and Outer Bearing Caps for F# 400T and Larger
Stainless Steel Nameplate and Hardware
Stainless Steel Automatic Breather Drain
New Dual Column Design Nameplate as Standard (60/50 Hz)
Suitable for Inverter Use per NEMA MG-1.4.4.2, Part 31
Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)
Motors are U.L. Recognized, CSA Approved
3 Leads Only
Dual Drilled Feet Available on Most Ratings - Longer Frames (i.e. 145T Drilled also for 143T)
Vibration Not to Exceed 0.08 Inches Per Second
Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded