///MAX-PE TEFC SS Low Voltage Normal Thrust with “P” Base

MAX-PE TEFC SS Low Voltage Normal Thrust with “P” Base

Totally Enclosed Fan Cooled, [NPV_P]

Categories: ,
HP 15 hp through 200 hp
Speed 3600, 1800, 1200 RPM
Voltage 230/460V (Usable on 208V)
Frequency 60 Hz.

Features

    • Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
    • CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum
    • Class F Insulation
    • Class B Temperature Rise
    • NEMA Design B Torques
    • Cast Iron Frame, End Brackets, Fan Cover, Drip Cover and Main Conduit Box
    • Rolled Steel, Fan Cover, Drip Cover and Main Conduit Box
    • Grounding Terminal Inside Main Conduit Box
    • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
    • Designed for 40˚C Ambient Temperature
    • Designed for 3300 ft. Elevation
    • Bi-Directional Rotation
    • 1045 Carbon Steel Shaft
    • Aluminum Die Cast Squirrel Cage Rotor Construction
    • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
    • Paint Color: Dark Gray - Munsell 7.5B 3.5/0.5
    • Guide Bearings: 250HP - 449HP Frames are Single Shielded
    • Thrust Bearings: 250HP - 449HP Frames are Re-Greasable Angular Contact with Mobil Polyrex™ EM
    • Automatic Grease Discharge Fittings on Regreasable Motors
    • Labyrinth Type Metal Flinger on Both Ends for Frames 320 HP & Large
r
  • Cast Iron Inner and Outer Bearing Caps for Frames 280 & Larger
  • Stainless Steel Nameplate
  • New Dual Column Design Nameplate as Standard (60/50 Hz)
  • Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1, Part 31
  • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
  • 12 Leads
  • Dust Flinger on Drive-End for F# 140 HP - 280 HP
  • NEMA Type P Base